[ Home ] [Tuthill
Pump Guide] [Request
Literature] [Application/Quote Request]
Tuthill gear pumps were known as Tutcal
Pump. Tuthill gear pumps are sealless magnetic drive pumps.
Tuthill T Series
Magnetic Drive Gear Pumps
|
|
Flow Rates to 41 lpm (10.8 gpm) Differential Pressure to 250 psi System Pressure to 500 psi 316 Stainless Steel Pump Body 3/8", 3/4", 1/2" NPT Connections |
|
Model
( ml/rev) |
Flow @ 3500
RPM
|
|||
|
GPH @
0 PSI |
L/Hr @
0 bar |
GPH @
Max. Diff. Pressure |
L/Hr @
Max. Diff. Pressure |
|
|
2.6
|
137 GPH
|
518 L/Hr
|
114 GPH @ 150 PSI
|
431 L/Hr @ 10.3 bar
|
|
5.3
|
279 GPH
|
1056 L/Hr
|
249 GPH @ 100 PSI
|
942 L/Hr @ 6.9 bar
|
|
7.9
|
416 GPH
|
1575 L/Hr
|
384 GPH @ 70 PSI
|
1453 L/Hr @ 4.8 bar
|
| 8.0 | 421 GPH | 1593 L/Hr | 353 GPH @ 150 PSI | 1336 L/Hr @ 10.3 bar |
|
12. |
650 GPH |
2460 L/Hr |
600 GPH @ 100 PSI |
2270 L/Hr @ 6.9 bar |
|
Performance
Estimate Based on Pumping 68°F (20°C) Clean Deionized Water
@ 1.0 centipoise fluid viscosity
|
||||
Specifications:
Temperatures: -50°F to 350°F
(-46°C to 176°C)
Viscosities: 0.3 to 2000 cps+
Magnet Torque: 460 in/oz (W) and 240 in/oz (X) magnets available.
Magnet Materials: Samarium Cobalt
Metal Wetted Parts: 316 Stainless Steel or Hastelloy C276
Gear Materials: PPS (Polyphenylene Sulfide) or PEEK (Polyetheretherketone)
*
Bearing Materials: PPS, PEEK
or Carbon *
O-Rings: Viton, Teflon, EPR (Ethylene Propylene Rubber), or Neoprene *
Ports: 3/8" NPT on models T2.6, T5.3 & T7.9. 3/4" NPT inlet & 1/2" NPT
outlet on models T8.0 & T12. only.
Suction Vacuum: Pumps self
prime when wetted with operating fluid to 28.5 Hg" (724mm Hg). Dry lift not
recommended. Fluid viscosity, temperature and pressure may affect the
performance.
Speed: 5,000 RPM maximum.
Service Life: Up to 20,000 hours + based on clean water.
For
Operating Temperatures above 140°
F (60° C)
In the T Series Product line we
offer special sizing option for operating at temperatures above 140° F (60°
C). Below is a chart for selecting the option letter for the 17th
position of the model number for specifying your operating temperature.
|
Letter |
° C |
° F |
Letter |
° C |
° F |
|
B |
61-70 |
141-158 |
F |
101-120 |
213-248 |
|
C |
71-80 |
159-176 |
G |
121-140 |
249-284 |
|
D |
81-90 |
177-194 |
H |
141-160 |
285-320 |
|
E |
91-100 |
195-212 |
J |
161-180 |
321-356 |
Gear & Bearing Material
Temperature Limit
PPS limit is approximately 250° F
(121° C)
Carbon and Peek limits are
approximately 350° F (176° C)
If possible, for temperatures above
250° F (121° C) Carbon bearings should be selected.
*Contact us for other
options available
Tuthill T Series Specifications Page
Tuthill T Series Model Numbering Guide
