About Ober-Read|
[ Home ]
Wanner Engineering makes the Hydracell Hydra-cell high pressure diaphragm pump and Ober-Read.
 Wanner Engineering
Hydra-Cell Pumps

Click here to learn about the Kel-Cell DPC feature that enhances pump life.
 


NEW - Hydra-Cell Metering Solutions - Click Here

[Pictured - Wanner P200]
 

 

[ Hydra-Cell Features and Applications ] [ Hydra-Cell Models and Performance ] [ Hydra-Cell Materials of Construction ]

[ Downloads - Operation & Instruction Manuals for Hydra-Cell Pumps ] 

Hydra-Cell pumps are the solution for challenging industrial and OEM applications. The hydraulically-balanced diaphragm design assures long-life in a seal-less design. Hydra-Cell pumps can support applications ranging from 35 psi to 2500 psi, at Flow Rates from 0.1 to 38 GPM. The patented diaphragm and valve combination can survive abrasive fluids and slurries and is ideal for applications in the fields listed below 

Hydra-Cell Features

Seal-less for leak-free service Smooth Flow delivery - Low Pulsation
Rugged cast housing components Easy to maintain and service
Positive displacement delivery Hydraulically balanced for long diaphragm life
Quiet operation Run-Dry capability without damage
Simplex, Triplex and Pentaplex versions Heavy duty timken bearings

Hydra-Cell Applications and Markets

OEM Applications Industrial Manufacturing Applications
Machine Tool Coolant Filtration Paper Mill Applications
Lawn Care Oil Production
Propellant Packaging Stack Gas Emissions
Power Generation Turbine Emissions Food Processing / In Plant Cleaning
Parts Washing Chip Board Manufacturing
Reverse Osmosis Tote, Tank and Barrell washing
Agricultrual Spraying Spray Drying Abrasives
Car Wash Systems Abrasive slurry applications

[ Top of Page ]

 

HydraCell Models and Performance

Click on Thumbnails below to download catalog specifications for each model

Series Cam  Flow Rate Max
@ 1750 RPM		 Max Diff Pressure Max Temp(1) Inlet Port Discharge Port
Check out the performance curve, specifications, dimensions and options.
F-20		 X
E
S
B
G		 1.00 GPM
0.73 GPM
0.55 GPM
0.33 GPM
0.20 GPM		 1500 PSI 250 deg F 1/2" FNPT 3/8" FNPT
These pumps are available with brass or polypropylene heads. Drive can be either close coupled, shaft driven or gas engine powered.
M-03		 X
E
S
B
G		 3.0 GPM
2.2 GPM
1.8 GPM
1.1 GPM
0.5 GPM		 1000 PSI
1200 PSI
1200 PSI
1200 PSI
1200 PSI		 250 deg F 1/2" FNPT 3/8" FNPT

D-04		 X
E
S		 3.0 GPM
2.2 GPM
1.8 GPM		 2500 PSI 250 deg F 1/2" FNPT 1/2" FNPT
D-10 Series pumps are available with motor adapters for shaft mounting. They can be equipped with flanged pump heads for critical performance applications. Check performance curve, specifications, dimensions and options.
D-10/M-10/D-11		 X

E
S
I		 8 GPM
( @ 1450 RPM)
8 GPM
6 GPM
4 GPM		 1000 PSI 250 deg F 1" FNPT 3/4" FNPT

D-12		 X

E
S
I		 6.2 GPM
( @ 1150 RPM)
8 GPM
6 GPM
4 GPM		 1000 PSI 250 deg F 1" FNPT 3/4" FNPT

D-15/D-17		 X

E

 13 GPM @ 1450 RPM


15 GPM		 2500 PSI
@ 1450 RPM
2000 PSI 
@ 1150 RPM

1500 PSI
 250 deg F 1-1/4" FNPT 3/4" FNPT
Choose between brass or polypropylene pump heads. Check out performance curve, specifications, dimensions and options.
H-25		 X

E
S
I
 20 GPM @
1050 RPM
20 GPM
16 GPM
12 GPM
(All 1150 RPM)		 1000 PSI 250 deg F 1-1/2" FNPT 1" FNPT
Wanner D-35 pumps are specifically designed for abrasive slurry applications. Check out the performance curve, specification, dimensions and options.
D-35		 X

E

 37 GPM @ 1050 RPM
35 GPM @ 1150 RPM		 1200 PSI 250 deg F 2-1/2" FNPT
or
2-1/2" SAE Flange		 1-1/4" FNPT
or
1-1/4" SAE Flange
SD Slurry Duty pumps are specifically designed for those tough abrasive slurry applications. Check out performance curve, specifications, dimensions and options.
 SD Slurry Series		 D10
H25
D35		 8 GPM
20 GPM
37 GPM		 300 PSI 140 deg F 1" FNPT
1-1/2" FNPT
2-1/2" FNPT or Flange		 3/4" FNPT
1" FNPT
1.25" NPT or Flange


(1) For applications above 160 deg F Fluid Temp, please consult Ober-Read & Associates or Hydra-Cell factory for assistance.

[ Top of Page ] 

HydraCell Materials of Construction

Component Available Materials of Construction Available on the models below
Pump Head Brass
Cast Iron
Nickel Plated Ductille Iron
316 Stainless Steel
Hastelloy C
Polyporpylene
Kynar (PVDF)
Celcon (Delrin)		 F20, M03, D04, D10, D12, D15, D35, H25
D10, D12, H25
D35
F20, M03, D04, D10, D12, D15, H25, D35
F20, M03, D10, H25, D35
F20, M03, D10, H25
F20, M03, D10, H25
SD
Diaphragms and O-rings EPDM
Viton
Neoprene
Buna
Teflon (Metallic Pumphead only)		 F20, M03, D10, D12, H25, D35, SD
F20, M03, D04, D10, D12, D15, H25, D35, SD
F20, M03, D10, D12, H25, D35, SD
F20, M03, D04, D10, D12, D15, H25, D35, SD
F20, M03, D10, D12, H25, D35
Valves 17-7 Hardened Stainless Steel
17-4 Hardened Stainless Steel
Ceramic
Nitronic 50
Hastelloy C
Tungsten Carbide		 F20, M03, D04, D10, H25
D10, D12, D15, H25, D35
F20, M03, D10, D12, H25, D35, SD
F20, M03, D10, D12, D15, H25, D35
F20, M03, D10, D12, H25, D35
D04, D15
Valve Seats 17-4 Hardened Stainless Steel
Ceramic
316 Stainless Steel
Nitronic 50
Hastelloy C
Tungsten Carbide
Polyurethane		 F20, M03, D04, D10, D12, D15, H25, D35 
F20, M03, D10, D12, H25, D35,
F20, M03, D10, D12, H25
D15, D35,
F20, M03, D10, D12, H25,D35
D04, D15
SD
Valve Springs Elgilloy
17-7 Hardened Stainless Steel
316 Stainless Steel
Hastelloy C		 F20, M03, D04, D10, D12, D15, H25, D35
D10, H25, D35, SD
M03, D04
F20, M03, D10, D12, D15, H25, D35
Valve Spring Retainers Celcon (Delrin)
Polypropylene
Kynar (PVDF)
Nylon (Zytel)
17-7 Hardened Stainless Steel
Hastelloy C		 F20, M03, D04, D10, D12, D15, H25, D35
F20, M03, D04, D10, D12, D15, H25, D35, SD
F20, M03, D04, D10, D12, D15, H25, D35
F20, M03, D04, D10, D12, D15, H25, D35,
D10, D12, D15, H25, D35
D10, D12, H25, D35


[ Top of Page ] [ Wanner Metering Pumps ]

[ Home ] [ Contact Us ] [ Product Line Card ] [ Submit Application ] [ Request Literature ]